Ever caught yourself halfway through a vape thinking, “I’m done with this flavour”? It happens. The Hayati Pro Ultra Plus fixes that in one neat move – a twist-and-click mouthpiece that flips between two flavours without juggling pods, bottles or spare kits. Whether you’re on the train into Tunbridge Wells or taking five in Calverley Grounds, this setup keeps things fresh, fast and tidy.
This device is also a great case study if you’re doing a refillable vs disposable vape comparison, it offers the convenience of a disposable but with a rechargeable battery and replaceable pods, giving you longer use and less waste.
Unboxing: What You Get
Inside the Hayati Pro Ultra Plus 25K prefilled kit:
- 1 x Hayati Pro Ultra Plus device (850mAh battery)
- 2 x 2ml pods with built‑in mesh coils
- 2 x 10ml e‑liquid containers (auto-feeds the pods)
- 1 x detailed user manual
Everything locks together intuitively, so it’s welcoming for first-timers and efficient for seasoned vapers. Sites like Ecigone often list exactly what’s included, making it easier to compare with other kits before buying.
Initial Setup and Charging
- Use a USB‑C cable (sold separately).
- Charge time: around 45 minutes from low to full.
- The screen shows charge progress – no guesswork.
Tip: Give it a full first charge to calibrate the battery gauge. You’ll get a more accurate read on remaining power every session.
Installing Your Pods (Auto Refill = No Mess)
- Insert the pods: Slide each 2ml pod into its slot until you feel/hear a click.
- Attach the e‑liquid containers: Connect each 10ml container to its matching pod, the system will auto-feed when needed.
- Check the display: It should confirm both flavours are detected and ready.
The dual mesh coil design wakes up instantly, so both flavours deliver clean taste from the first puff.
Master the Twist‑and‑Click Mouthpiece
Switching flavours takes seconds:
- Twist left: Flavour one (you’ll see it on the left of the display).
- Twist right: Flavour two (shown on the right).
- Feel the click: That tactile confirmation means the switch is engaged.
The display updates immediately to show the active flavour and its individual puff count.
Make Your Pods Go Further
- Rotate your flavours: Changing it up stops palate fatigue and helps the two pods wear evenly – good for longevity.
- Watch your numbers: The screen shows remaining puffs per side, so you can plan top-ups and replacements rather than get caught short.
- Prime on the fly: After switching flavours, take a gentle primer puff to saturate the coil. You’ll hit full flavour straight away.
When It’s Time for New Pods
Swap pods if you notice:
- Puff counts running low: The device will tell you.
- Flavour drop-off or a burnt edge: That coil’s at the end of life.
- Thinner vapour than usual: Usually a sign the pod needs changing.
- Auto-refill stutter: If the 10ml container isn’t feeding smoothly, fresh pods will often resolve it.
Avoid Common Pitfalls
- Burnt taste: Don’t push beyond the intended puff life – once you catch a burnt note, stop. Mesh coils don’t bounce back from heat damage.
- Misfires: Reseat the pods firmly. A loose pod can cause inconsistent firing and interrupt the auto-feed.
- Battery dips: Quick, regular charges keep performance consistent. USB‑C power delivery helps you get back to vaping swiftly.
Quick Troubleshooting
- Display not updating: Remove and reinsert both pods to refresh detection.
- Flavour not switching: Twist with a deliberate motion until you feel the click — that’s the engagement point.
- Weak flavour: Check the 10ml containers still have liquid and that both connections are snug.
Why This Kit’s Great Value
- Up to 25,000 puffs per complete kit: Long-lasting by design.
- Dual flavour flexibility: Think Blue Razz Cherry, Strawberry Watermelon, Kiwi Banana/Straw Banana – 20 combos to keep it interesting.
- Rechargeable 850mAh battery with a smart display: More sustainable than chuck-away disposables, with clear visibility on usage and life.
Leave a Reply